AIS 140 compliant GPS vehicle tracking devices

AIS 140 compliant GPS vehicle tracking devices

Home >> AIS 140 compliant GPS vehicle tracking devices

AIS 140 compliant GPS vehicle tracking devices

  • AIS 140 compliant GPS vehicle tracking devices are manufactured by Sensel Telematics. This compact and lightweight device weighs just 80 gm and receives OTA (Over the air) firmware and configuration updates.

  • The device primarily tracks and locates the vehicle in real-time. Additionally, the AIS 140 compliant GPS vehicle tracking devices are enriched with other user-friendly features and make the monitoring and management of fleets effortless.

  • Built-in sensors indicate temperature and humidity levels. The device is waterproof and can detect tampering.

AIS 140 compliant GPS vehicle tracking devices

Product Specifications

AIS 140 GPRS/GSM Specification:

  • Quad Band (850/900/1800/1900 MHz)
  • Mobile station class B supporting GPRS Class 10, coding schemes 1 to 4 and PBCCH
  • Module approvals: fully type approved conforming R&TTE directive, CE, GCF
  • SMS (text/data)
  • 3 GPP Release 4
  • TCP/IP

Output Power:

  • – Class 4 (2W) @ 850/900 MHz
  • – Class 1 (1W) @ 1800/1900 MHz

GSM Sensitivity:

  • ≤- 108 dBm (typ.) @ 850/900 MHz
  • ≤- 107 dBm (typ.) @ 1800/1900 MHz

AIS 140 GPS Specifications:

  • GPS L1 1575.42MHz C/A Code
  • Horizontal Position Accuracy < 2.5 m CEP
  • NMEA-0183

Dimensions

  • 141x78x28 (LxWxH) in mm

Environment Specification:

  • Operating Temperature: -10 deg C to +70 deg C
  • ESD: up to 12kV

Electrical Specification:

  • Input Voltage Range: 8V to 36V
  • Protected against load dumps
  • Current consumption: < 0.5 Amps (avg) at 12V

VTX 10C

AIS 140 compliant GPS vehicle tracking devices
Contact Now
AIS 140 compliant GPS vehicle tracking devices
  • The AIS 140 compliant GPS vehicle tracking devices have a 3-axis accelerometer and 3-axis gyroscope that monitor driver behavior and detect harsh braking, cornering, and acceleration made by the driver.
  • The device has 2 analog inputs and 2 digital outputs and can send reports to 2 IP addresses. This AIS 140 compliant GPS vehicle tracking device can also be used by cab companies in their services and is compliant with the government initiated Nirbhaya Act that allows the passenger to access and trigger a panic button in case of any distress/emergency.
  • RFID (Radio-frequency Identification) card reader is also supported by the device and can be used for employee tracking and identification.
  • Programmable update rate (> 5 seconds)
  • TCP/IP and HTTP support
  • Internal Antenna (GSM and GPS)
  • 2 LED indicators for GSM and GPS activity
  • Internal Battery with NTC, overvoltage and short circuit protection
  • Tamper detection
  • Harsh Acceleration/Braking/Cornering detection
  • 3-axis accelerometer and 3-axis gyroscope
  • Tilt sensing
  • 1 RS232 port for interface with accessories
  • 2 RPM (Frequency) or Digital Inputs
  • 2 Digital Outputs
  • 2 Analog Inputs
  • Emergency / Panic Button(s) support
  • Memory Storage: up to 60,000 logs
  • 1s data storage for 12 hours
  • Update to 2 IP Addresses
  • Over the Air Firmware update
  • Over the Air Configuration update
  • Embedded SIM support
  • SIM with multiple profile support
  • On-device Geofences support
  • Built-in 1W Audio Amplifier
  • External Antenna
  • Handsfree Voice call kit: Speaker 8ohm 85dB/ Watt/ Meter and Microphone
  • Audio file storage and playback
  • 1 RS232 Port for interface with accessories
  • 1 Analog output (DAC)
  • 1 Digital I/O (configurable)
  • 2 Digital Inputs
  • CAN interface (optional OBD-II connector)